Friday, January 6, 2017

New York City



Visiting New York was a place that I didn't care to ever experience. But when the opportunity arose to go, I said yes. I experienced more of the style of living than anything else.

First was the flight. I can barely remember flying when I was a little girl. What I did remember was only the fun stuff. I didn't remember standing in lines, getting baggage checked in, getting scanned after taking of your shoes and belt. That was all new and exciting. The best part of flying to me is the take off. Slowly watching the ground become smaller and smaller as you rise up above the clouds. Another part of flying that I do not remember is the wave of tiredness and hunger consuming me the next day.


My friends and I helped fix up an apartment in the Queens area. One thing that truly amazed me was the fact that living spaces are so small, and time at home is not where someone would spend a lot of time. It also amazed me at how little grass there is. As far as one can see there is tall buildings after another, road after road, but.... "Might I have a bit of earth?"


New York is very dirty to me. I never felt clean while visiting. Only right after a shower. You also never know if there will be any air conditioning or not. So, you might put on your jacket because your cold then five seconds later begin to sweat, but know you will want it back on it a few minutes. The range of ethnicity came to a bit of a shock to me. I am Caucasian, and I felt like a minority. I saw people from all sorts of ethnicity and backgrounds. Also, not everyone spoke English. I heard Russian, Korean, Japanese, Spanish, and many many more.


All in all, I love grass and trees and mountains. New York is not the place for me. But the experience will never be forgotten. The food will be forever remembered. And I will forever belong in the mountains.



 -Jane Potter






















Tuna Pasta Salad



Tuna Pasta Salad 
Servings: 2           
 Total Prep Time: 40 min



















               Ingredients
8 oz tuna
3 ½ tbsp. mayonnaise
2 ½ tbsp. relish
1 tsp honey mustard
1 tsp minced garlic
Small cucumber, peeled and diced
¼ cup diced fresh tomato
1 cup uncooked noodles
Salt and pepper to taste
 

                Directions
Boil water and add noodles. Cook until al dente (firm to the bite). 
Meanwhile, combine all of the other ingredients. 
Once noodles are cooked and drained add them to the tuna mixture. 
Place in the fridge until cooled and enjoy!

Bandaged Bandeau/Bra




Bandaged Bandeau/Bra

I needed something to work as a bra/undershirt for a costume that would match the costume itself, but I also needed something that would offer some support. I was wanting to dress up as a female pirate. The shirt I have is definitely screams pirate or brigand, but to wear an undershirt underneath would just look tacky. So I created something that would have the bandage look but still offer enough support so I would feel comfortable.


Step 1: Gather your supplies
You will need enough fabric to fit around your chest area plus enough fabric to cut into strips for the bandaged look.
The fabric I used was actually left-over from a Toph costume. It was an old tablecloth that I found at a thrift store.
You will also need basic sewing materials such as a sewing machine, pins, scissors, measuring tape, and tracing pencil.
I fastened mine with a zipper in the back. But you can use bra clasps or elastic fabric.
You may also want bra cups if you have a larger bust. I almost put some in, but I am small enough it looked alright.

To create the pattern, you will need cling wrap and masking tape or duct tape.
*A buddy would be helpful too
*I prefer the masking tape



Step 2: Making the pattern
*This became a difficult task because I did it all by myself. You can do it alone if you wish, but I recommend a close friend to help.
First, take the cling wrap and wrap around your chest and any of the areas that you want fabric to be eventually. Leave some extra too.
Second, wrap around and around with the masking tape till you have everywhere covered to create your pattern. If you applied too much tape that’s OKAY. Just grab a marker and mark off the section.
Third, once it looks sort of how you want the finished product to look like, cut it off. I cut mine in the back because that was where I wanted my zipper (which was once again very difficult because I did it by myself).
 

Here is what I have so far. I have created my “pattern” and cut if from my body.



 


Next cut off any excess cling wrap and tape. Make it as close as you can to how you want it to look in the end.

Next you get to cut up what you have so far. The goal is to get it to lay flat. You will need that extra room for your bust, therefore you can’t have just one piece of fabric. I cut mine into three pieces.
 I cut off the strap first.


Then I cut the main chest piece in half where it came to the highest peak.


*Strap is not shown in this picture

 


Next just find some big heavy books and flatten your pattern.



 






Step 3: Cutting out the pattern


While your pattern is flattening, iron out the fabric you are using and trim any edges that might be frayed.
When your pattern pieces are flat lay them out on your fabric and trace them.
 

 



















Then add a seam allowance. I used 1/4in. 

I then cut the everything out on the dotted line.
 


















 

Step 4: Putting it together

Next sew the seam allowance except where you will be sewing another piece on.

*Since my bottom chest piece is curved, I had to cut a few slits while sewing the seam allowance.




Next I sewed all the pieces together except in the back where my strap will connect and where the zipper will go.

*Now would be the time to add the bra cups if you are using any
 
 
 








Step 5: Adding the bandage affect
I was looking for the bandaged rustic look. Sort of like Erza from Fairy Tail’s Samaria top.




Cut a bunch of strips from your fabric, some bigger and some smaller.
*You won’t know how many you will need till you are done. So I cut some more as I went

 






I started on the strap. I laid some of the strips down and figured out about how I wanted it to look.
I sewed each side of the strip so the side edges would stick out a bit. I want them to fray.
 
*Since I am on the strap I didn’t sew into the chest area, because I know I will be putting more layers over that area.


 
*I pinned the strip down that I was sewing as well. Here is an example.





 


Here are all the strips sewed onto the strap.







Then I trimmed all of the ends off so that they were straight.



 


Continue this process till you have covered the whole thing.
 
 
 










Step 6: The zipper
 
 


First trim the ends so that all the strips are straight with the original piece.






 




I then folded it over so that it would have a 1/2in seam allowance and ironed it.



 

 *I used an old jacket zipper. Since it was plastic I could just cut it with scissors. I then used some extra fabric and sewed it onto the end of the zipper so it would not slide off.
Unzip the zipper and pin it to each side. Then sew. It should look something like this.
 
 
 



Step 6: The strap


Put on the bralette and have a trusted friend line it up where it should go on the back. Either have them mark it with a pencil or pin it.
Then sew that strap on!













Optional Step…
So after wearing my bralette all day at a festival I realized It was quite difficult to breath in because it didn’t have any give way on my ribcage. I would suggest adding some thick elastic to the bottom.